Comparison and Limit Comparison Tests Explained with Worked Examples

Comparison: if and converges, so does . Limit comparison: if , the two series behave alike.

Write 2x or 2*x to multiply, ^ for powers, and ; between simultaneous equations. You can also type factor, expand, derivative of, integrate … from a to b, limit … as x->0 or 15% of 80.

Try an example

Before you start

This page is easier if you are comfortable with:

What Comparison and limit comparison tests means

Compare a series with a known one such as a -series or geometric series. If your terms are smaller than those of a convergent series, yours converges; if they are bigger than those of a divergent series, yours diverges.

The limit comparison test is easier to apply: take the ratio of the terms, and if it has a finite non-zero limit, both converge or both diverge.

Choose the comparison series by looking at the dominant terms for large . Typical comparison series are geometric series and p-series, and for positive decreasing terms there is also the integral test.

This page is part of Series and convergence in Calculus. Topics that work alongside it: p-series, Geometric series convergence, Integral test, Alternating series test (Leibniz), Stirling's approximation and Root test.

What is it used for?

Comparison tests decide whether a series converges by comparing it with a series you already understand, such as a p-series or geometric series.

How to use comparison and limit comparison tests

  1. Find a similar series that you know.
  2. Compare the terms, or take the limit of the ratio.
  3. Apply the test.
  4. State the conclusion.

Graph

1/(n² + n) lies below 1/n²11.522.533.544.555.5600.20.40.60.811/(n² + n) lies below 1/n²xy1/n²1/(n² + n)Graph with x from 1 to 6 and y from 0 to 1.1. Shows the curve 1/n²; the curve 1/(n² + n).

Every term of Σ1/(n² + n) is smaller than the matching term of the convergent series Σ1/n², so it converges too.

Worked examples

These examples are worked by hand, step by step, so you can compare your own working.

Example 1: direct comparison

Test .

Worked example
Answer
Converges\text{Converges}
  1. Compare
  2. Use the p-series
    converges.
  3. Conclude
    By comparison, the series converges.

Example 2: limit comparison

Test .

Worked example
Answer
Converges\text{Converges}
  1. Choose b_n
  2. Take the limit
  3. Conclude
    The limit is finite and non-zero, so both behave alike. converges, so the series converges.

Example 3: 1 over n² + n

Test .

Worked example
Answer
converges\text{converges}
  1. Compare with a known series
  2. Σ1/n² converges (p = 2)
    The smaller series must converge too.

Special cases

A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.

1/(n² + 1) ≤ 1/n²

converges

Σ1/n² = π²/6.

aₙ = (2n + 1)/(n³ + 5), bₙ = 1/n²

ratio at n = 100

2.0100 → 2.

Limit

c = 2

Both converge or both diverge.

1/√n ≥ 1/n

Σ1/n diverges

So Σ1/√n diverges.

Word problems

Comparison: 0 ≤ aₙ ≤ bₙ and Σbₙ converges ⇒ Σaₙ converges (and divergent below ⇒ divergent above). Limit comparison: lim aₙ/bₙ = c ∈ (0, ∞) means the series behave alike.

Direct comparison

Bound Σ1/(n² + 1) by Σ1/n².

  1. π²/6
  2. Check: ✓1.6449

Limit comparison

aₙ/bₙ at n = 100 for (2n+1)/(n³+5) and 1/n².

  1. 2.0100
  2. Check: → 2 ✓2.01

The limit Higher

Limit c.

  1. 2
  2. Check: finite and positive ✓2

Divergence Higher

Find 1/√100.

  1. 0.1
  2. Check: ≥ 1/100, diverges by comparison with harmonic ✓0.1

Common mistakes

Wrong direction

larger series converges ✗

smaller converges if larger does ✓

Direction.

Limit 0 or ∞

LCT applies ✗

needs finite positive c ✓

Else inconclusive.

Negative terms

allowed ✗

terms ≥ 0 ✓

Positive series.

Wrong benchmark

p-series with wrong p ✗

match the leading behaviour ✓

Pick bₙ.

Exam tips

  1. Pick bₙ from leading terms.
  2. Direction matters.
  3. LCT: 0 < c < ∞.
  4. Positive terms.
  5. Known benchmarks: p-series, geometric.

Practice questions

Try each one on paper, then open the answer. Use the solver above to see the full working.

1. aₙ/bₙ at n = 1000 for (3n+1)/n³ vs 1/n² to 4 d.p. Foundation

3.001

2. aₙ/bₙ at n = 100 for n/(n²+1) vs 1/n to 4 d.p. Foundation

0.9999

3. 1/(n² + 1) at n = 10 to 5 d.p. Foundation

0.0099

4. 1/n² at n = 10 Higher

0.01

5. aₙ/bₙ at n = 50 for (2n)/(n²+3) vs 1/n to 4 d.p. Higher

1.9976

6. 1/√n at n = 25 Higher

0.2

Practice generator

Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.

Solve: …

Key terms

Comparison test
Compare termwise.
Limit comparison test
lim aₙ/bₙ = c.
Benchmark series
Known behaviour.
Positive series
Terms ≥ 0.
p-series
Σ1/nᵖ.
Leading behaviour
Dominant term.

Frequently asked questions

What is the comparison test?

If 0 ≤ aₙ ≤ bₙ and Σbₙ converges, so does Σaₙ.

What is the limit comparison test?

If aₙ/bₙ → c ∈ (0, ∞), the series behave alike.

What do I compare with?

p-series or geometric series.

Do terms have to be positive?

Yes.

Which page covers the integral test?

integral test.

Which page covers the root test?

root test.

More in Calculus and the formula sheets.