Arc Length of a Sector Formula Solver with Worked Examples

The length of an arc is a fraction of the circumference: , where is the angle at the centre in degrees (the Greek letter theta). Use the calculator to find the arc length, the angle or the radius.

Write 2x or 2*x to multiply, ^ for powers, and ; between simultaneous equations. You can also type factor, expand, derivative of, integrate … from a to b, limit … as x->0 or 15% of 80.

Try an example

Give every value except the one you want, or write the letter with a question mark, for example t=60, r=9 or L=10, r=5. Every answer is checked by putting it back into the formula.

  • : arc length
  • : angle at the centre, in degrees ()
  • : radius

Before you start

This page is easier if you are comfortable with:

  • the circumference of a circle, 2πr
  • fractions of a turn: 90° is a quarter of 360°
  • using π and the calculator in degree mode

What Arc length of a sector means

An arc is a part of the edge of a circle. The angle at the centre tells you what fraction of the full circle it is: out of 360 degrees.

So the arc length is that fraction of the whole circumference . A 90° angle gives a quarter of the circumference, and 180° gives half.

This page works in degrees. If your angle is in radians, the arc length is simply . The matching area of the slice is sector area, and the whole disc has the area of a circle.

This page is part of Circles, arcs and sectors in Geometry and measures. Topics that work alongside it: Sector area, Circumference of a circle, Area of a circle, Perimeter of a semicircle and a sector, Volume of a cone and Surface area of a sphere.

What is it used for?

An arc is part of the circumference. Its length is the fraction θ/360 of the whole circumference: arc = θ/360 × 2πr.

How to use the arc length of a sector formula

  1. Write down the angle in degrees and the radius .
  2. Work out the fraction .
  3. Multiply by the circumference .
  4. To find the angle or radius, rearrange first. The calculator shows this step.

Diagram

θr

The arc is the curved edge of the sector. Its length is the fraction θ/360 of the full circumference.

Worked examples

Each example below was worked out by the solver on this page and checked by substituting the answer back into the formula.

Example 1: find the arc length

A sector has radius 9 cm and angle 60°. Find the length of its arc.

Arc length of a sector Answer checked
Answer
L=3π≈9.425L=3\pi \approx 9.425
  1. The formula
    Arc length of a sector. In this formula is the arc length, is the angle at the centre, in degrees, is the radius.
  2. What we know and what we want
    We know and we want to find , the arc length.
  3. Substitute the numbers
  4. Calculate
  5. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 2: find the angle

An arc of length 10 cm lies on a circle of radius 5 cm. Find the angle at the centre.

Arc length of a sector Answer checked
Answer
t=360×1π≈114.6 °t=360 \times \frac{1}{\pi} \approx 114.6\ \text{°}
  1. The formula
    Arc length of a sector. In this formula is the arc length, is the angle at the centre, in degrees, is the radius.
  2. What we know and what we want
    We know and we want to find , the angle at the centre, in degrees.
  3. Rearrange for
    Multiply both sides by 360, then divide by 2πr.
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 3: find the radius

An arc of length 9.42 cm subtends an angle of 60° at the centre. Find the radius.

Arc length of a sector Answer checked
Answer
r=28.26×1π≈8.995r=28.26 \times \frac{1}{\pi} \approx 8.995
  1. The formula
    Arc length of a sector. In this formula is the arc length, is the angle at the centre, in degrees, is the radius.
  2. What we know and what we want
    We know and we want to find , the radius.
  3. Rearrange for
    Multiply both sides by 360, then divide by 2πθ.
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Special cases

A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.

A quarter circle

θ = 90°, r = 8: L = ¼ × 2π × 8 = 4π ≈ 12.57

A 90° arc is a quarter of the circumference.

A semicircle

θ = 180°, r = 5: L = πr ≈ 15.71

Half the circumference.

In terms of π

θ = 60°, r = 9: L = 1/6 × 18π = 3π ≈ 9.42

Simplify the fraction first.

Finding the angle

L = 10, r = 5: θ = 360 × 10 ÷ (2π × 5) ≈ 114.6°

Rearrange for θ.

Arc length for radius 6
AngleFraction of circleArc length
30°1/123.14
60°1/66.28
90°1/49.42
180°1/218.85

Word problems

Write the angle as a fraction of 360°, then multiply by the circumference 2πr. Give the answer in units of length.

Finding the arc length

A sector has radius 9 cm and angle 60°. Find the length of its arc to 2 decimal places.

  1. Write the formulaL = (θ ÷ 360) × 2πr
  2. SubstituteL = (60 ÷ 360) × 2π × 9
  3. CalculateL = 9.42 cm
  4. Check: the full circumference is 56.55 cm, and a sixth is 9.42 ✓The arc is 9.42 cm long.

Finding the angle

An arc of length 10 cm is on a circle of radius 5 cm. Find the angle at the centre to 1 decimal place.

  1. Rearrangeθ = 360L ÷ (2πr)
  2. Substituteθ = 3600 ÷ 31.42
  3. Calculateθ = 114.6°
  4. Check: 114.6 ÷ 360 × 31.42 = 10.0 ✓The angle is 114.6°.

Finding the radius Higher

A 60° arc has length 9.42 cm. Find the radius to 1 decimal place.

  1. Rearranger = 360L ÷ (2πθ)
  2. Substituter = 3391.2 ÷ 376.99
  3. Calculater = 9.0 cm
  4. Check: this matches the first example ✓The radius is 9.0 cm.

The perimeter of a sector Higher

A sector has radius 6 cm and angle 75°. Find its perimeter to 2 decimal places.

  1. The arcL = (75 ÷ 360) × 2π × 6 = 7.85 cm
  2. Add the two radiiP = 7.85 + 12
  3. Check: the perimeter is longer than the 12 cm of straight sides ✓The perimeter is 19.85 cm.

Common mistakes

Using πr² for the arc

L = (60 ÷ 360) × π × 9² = 42.41 ✗

L = (60 ÷ 360) × 2π × 9 = 9.42 ✓

The arc uses the circumference.

Using the diameter as the radius

d = 18: L = (60 ÷ 360) × 2π × 18 = 18.85 ✗

r = 9: L = 9.42 ✓

Halve the diameter.

Dividing by 180

L = (60 ÷ 180) × 2π × 9 = 18.85 ✗

L = (60 ÷ 360) × 2π × 9 = 9.42 ✓

A full turn is 360°.

Forgetting the radii in a perimeter

perimeter = arc = 7.85 ✗

perimeter = arc + 2r = 19.85 ✓

A sector has two straight edges.

Using the formula in radians

putting 1.05 for 60° into θ ÷ 360 ✗

use degrees here, or s = rθ for radians ✓

See arc length in radians.

Giving square units

L = 9.42 cm² ✗

L = 9.42 cm ✓

An arc length is a length.

Exam tips

  1. Write the fraction θ ÷ 360 first, and simplify.
  2. Multiply by 2πr.
  3. Add 2r for the perimeter of a sector.
  4. Use degree measure in this formula.
  5. Use the π button.
  6. For radians use s = rθ.

Practice questions

Try each one on paper, then open the answer. Use the solver above to see the full working.

1. Use the formula to find the arc length (L) when angle at the centre, in degrees (t) = 16°, radius (r) = 7. Give your answer to 2 decimal places. Foundation

L = 1.95

2. Find the angle at the centre, in degrees (t) when arc length (L) = 0.98, radius (r) = 8. Higher

t = 7°

3. Find the radius (r) when arc length (L) = 0.49, angle at the centre, in degrees (t) = 7°. Higher

r = 4

4. Use the formula to find the arc length (L) when angle at the centre, in degrees (t) = 5°, radius (r) = 5. Give your answer to 2 decimal places. Foundation

L = 0.44

5. Find the angle at the centre, in degrees (t) when arc length (L) = 1.73, radius (r) = 9. Higher

t = 11°

6. Find the radius (r) when arc length (L) = 0.79, angle at the centre, in degrees (t) = 15°. Higher

r = 3

Practice generator

Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.

Solve: …

Key terms

Arc
A part of the circumference.
Arc length (L)
The length of the arc.
Sector
A slice of a circle between two radii and an arc.
Angle at the centre (θ)
The angle between the two radii, in degrees.
Circumference
The whole distance around. See circumference.
Radius
The distance from the centre to the edge.
Fraction of a circle
θ ÷ 360.
Perimeter of a sector
The arc plus two radii.

Frequently asked questions

What is the arc length formula?

L = (θ ÷ 360) × 2πr, with θ in degrees.

How do I find the angle from the arc length?

θ = 360L ÷ (2πr).

How do I find the perimeter of a sector?

Add the arc length to twice the radius.

What is the arc length of a semicircle?

πr.

What about radians?

Use s = rθ. See arc length in radians.

How is it related to sector area?

See sector area.

More in Geometry and measures and the formula sheets.