Curved Surface Area of a Cone Calculator with Worked Examples
The curved surface area of a cone is S=πrl, where r is the base radius and l is the slant height. Use the calculator to find it, or either length.
Give every value except the one you want, or write the letter with a question mark, for example r=5, l=13 or S=100, r=4. Every answer is checked by putting it back into the formula.
The slant height l is the distance from the tip of the cone down its side to the edge of the base. It is not the vertical height.
The curved part unrolls into a sector of a circle with radius l. Working out its area gives πrl.
If you only know the vertical height h, find l=r2+h2 first. For the total surface area, add the base πr2. It goes with the volume of a cone, the slant height comes from Pythagoras theorem, the base is the area of a circle, and the cylinder version is total surface area of a cylinder.
The curved surface area of a cone is πrl, where r is the radius of the base and l is the slant height.
Finding the amount of material for a traffic cone or party hat.
Finding the slant height with Pythagoras and then the area.
Finding the total surface area of a cone.
How to use the curved surface area of a cone formula
Find the base radius r and the slant height l.
Multiply π×r×l.
Write the answer in square units.
To find r or l, divide the area by π and the other length.
Diagram
Use the slant height l, which runs along the side, not the vertical height h.
Worked examples
Each example below was worked out by the solver on this page and checked by substituting the answer back into the formula.
Example 1: find the curved area
A cone has base radius 5 cm and slant height 13 cm. Find its curved surface area.
Curved surface area of a coneAnswer checked
Answer
S=65π≈204.2
The formula
Curved surface area of a cone. In this formula S is the curved surface area, r is the radius of the base, l is the slant height.
S=π×r×l
What we know and what we want
We know r=5,l=13 and we want to find S, the curved surface area.
Substitute the numbers
S=π×5×13
Calculate
S=65π≈204.2
Check by substituting back
Put all the values back into the original formula: both sides should match.
204.2=π×5×13✓
Example 2: find the slant height
A cone has curved surface area 100 cm² and base radius 4 cm. Find its slant height.
Curved surface area of a coneAnswer checked
Answer
l=25×π1≈7.958
The formula
Curved surface area of a cone. In this formula S is the curved surface area, r is the radius of the base, l is the slant height.
S=π×r×l
What we know and what we want
We know S=100,r=4 and we want to find l, the slant height.
Rearrange for l
Divide both sides by πr.
l=π×rS
Substitute the numbers
l=π×4100
Calculate
l=25×π1≈7.958
Check by substituting back
Put all the values back into the original formula: both sides should match.
100=π×4×7.958✓
Example 3: find the radius
A cone has curved surface area 120 cm² and slant height 10 cm. Find its base radius.
Curved surface area of a coneAnswer checked
Answer
r=12×π1≈3.82
The formula
Curved surface area of a cone. In this formula S is the curved surface area, r is the radius of the base, l is the slant height.
S=π×r×l
What we know and what we want
We know S=120,l=10 and we want to find r, the radius of the base.
Rearrange for r
Divide both sides by πl.
r=π×lS
Substitute the numbers
r=π×10120
Calculate
r=12×π1≈3.82
Check by substituting back
Put all the values back into the original formula: both sides should match.
120=π×3.82×10✓
Special cases
A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.
A standard cone
r = 5, l = 13: S = π × 5 × 13 ≈ 204.20
Use the slant height, not the height.
Finding l from h
r = 5, h = 12: l = √(25 + 144) = 13
Pythagoras gives the slant height.
The slant height from S
S = 100, r = 4: l = 100 ÷ 4π ≈ 7.96
Divide by πr.
The radius from S
S = 120, l = 10: r = 120 ÷ 10π ≈ 3.82
Divide by πl.
Curved surface areas
r
l
S
5
13
204.20
4
7.96
100
3.82
10
120
3
7.62
71.82
Word problems
Use S = πrl with the slant height. If you are given the perpendicular height, find l by Pythagoras first.
A party hat
A cone has radius 5 cm and slant height 13 cm. Find its curved surface area to 2 decimal places.
Write the formulaS = πrl
SubstituteS = π × 5 × 13
CalculateS = 204.20 cm²
Check: π × 65 ≈ 204.2 ✓The curved area is 204.20 cm².
The slant height
A cone of radius 4 cm has curved surface area 100 cm². Find its slant height to 2 decimal places.
Rearrangel = S ÷ πr
Substitutel = 100 ÷ 12.57
Calculatel = 7.96 cm
Check: π × 4 × 7.96 = 100 ✓The slant height is 7.96 cm.
Finding the radius Higher
A cone of slant height 10 cm has curved surface area 120 cm². Find its radius to 2 decimal places.
Rearranger = S ÷ πl
Substituter = 120 ÷ 31.42
Calculater = 3.82 cm
Check: π × 3.82 × 10 = 120 ✓The radius is 3.82 cm.
The total surface of a cone Higher
A cone has radius 5 cm and perpendicular height 12 cm. Find its total surface area to 2 decimal places.
Slant heightl = √(25 + 144) = 13
Curved surfaceπ × 5 × 13 = 204.20
Add the baseπ × 25 = 78.54, so the total is 282.74 cm²
Check: πr(l + r) = π × 5 × 18 = 282.74 ✓The total surface area is 282.74 cm².
Common mistakes
Using the perpendicular height
S = π × 5 × 12 = 188.50 ✗
S = π × 5 × 13 = 204.20 ✓
Use the slant height.
Using 2πrl
S = 2π × 5 × 13 = 408.41 ✗
S = π × 5 × 13 = 204.20 ✓
The cone formula has no 2.
Using the diameter
d = 10: S = π × 10 × 13 ✗
r = 5 ✓
Halve the diameter.
Forgetting the base for a total
total = 204.20 ✗
total = 204.20 + 78.54 = 282.74 ✓
The curved area leaves out the base.
Not squaring for Pythagoras
l = 5 + 12 = 17 ✗
l = √(25 + 144) = 13 ✓
Use l² = r² + h².
Writing cubic units
S = 204.20 cm³ ✗
S = 204.20 cm² ✓
Area uses square units.
Exam tips
Find l first with Pythagoras.
Use S = πrl.
Add πr² for a closed cone.
Check radius or diameter.
Square units.
Link to volume of a cone.
Practice questions
Try each one on paper, then open the answer. Use the solver above to see the full working.
1. Use the formula to find the curved surface area (S) when radius of the base (r) = 9, slant height (l) = 3. Give your answer to 2 decimal places. Foundation
S = 84.82
2. Find the radius of the base (r) when curved surface area (S) = 94.25, slant height (l) = 6. Higher
r = 5
3. Find the slant height (l) when curved surface area (S) = 37.7, radius of the base (r) = 2. Higher
l = 6
4. Use the formula to find the curved surface area (S) when radius of the base (r) = 5, slant height (l) = 5. Give your answer to 2 decimal places. Foundation
S = 78.54
5. Find the radius of the base (r) when curved surface area (S) = 56.55, slant height (l) = 2. Higher
r = 9
6. Find the slant height (l) when curved surface area (S) = 12.57, radius of the base (r) = 2. Higher
l = 2
Practice generator
Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.
Solve: …
Key terms
Curved surface area
The area of the sloping side of the cone.
Slant height (l)
The distance along the side from the apex to the edge of the base.
Radius
The base radius.
Perpendicular height
The height at right angles to the base.
Sector
The curved surface unrolls into a sector of a circle.
Base
The circular bottom.
Total surface area
Curved area plus the base.
Pythagoras
l² = r² + h².
Frequently asked questions
What is the curved surface area of a cone?
S = πrl, where l is the slant height.
How do I find the slant height?
l = √(r² + h²).
What is the total surface area?
πrl + πr² = πr(l + r).
Why πrl?
The curved surface unrolls into a sector with radius l and arc 2πr, whose area is πrl.