Conical Pendulum Formula Solver with Worked Examples

A particle on a string moving in a horizontal circle forms a conical pendulum. The string makes an angle with the vertical where . The calculator finds , the radius or the angular speed .

Write 2x or 2*x to multiply, ^ for powers, and ; between simultaneous equations. You can also type factor, expand, derivative of, integrate … from a to b, limit … as x->0 or 15% of 80.

Try an example

Give every value except the one you want, or write the letter with a question mark, for example r=0.5, w=4 or t=45, w=3. Every answer is checked by putting it back into the formula.

  • : angle of the string to the vertical ()
  • : radius of the circle ()
  • : angular speed ()

Before you start

This page is easier if you are comfortable with:

  • centripetal force, mv² ÷ r
  • resolving the tension into horizontal and vertical components
  • angular speed ω in rad s⁻¹, with v = rω

What Conical pendulum means

The tension has a vertical component that balances the weight: . Its horizontal component provides the centripetal force: .

Dividing the two equations removes and , giving . So the angle depends only on the radius and angular speed, not on the mass.

The faster it spins, the larger the angle and the wider the circle. With string length , the radius is . The ball moves in a circle, so the centripetal force and the speed and acceleration in circular motion apply, the string tension is resolved into components, and the straight swing is the simple pendulum.

This page is part of Circular motion and SHM in Mechanics. Topics that work alongside it: Circular motion: centripetal force, Circular motion: speed and acceleration, Resolving a force, Vertical circle, SHM: speed and acceleration and Simple pendulum and spring-mass period.

What is it used for?

A conical pendulum swings in a horizontal circle. The angle of the string depends only on the radius and the rotation rate.

How to use the conical pendulum formula

  1. Resolve the tension vertically and horizontally.
  2. Set vertical components equal to the weight.
  3. Set the horizontal component equal to .
  4. Divide to get .

Graph

Angle of the string for a radius of 0.5 mω = 4, θ = 39.2°012345678020406080Angle of the string for a radius of 0.5 mangular speed ω (rad s⁻¹)angle θ (degrees)θ = tan⁻¹(rω²/g)Graph with x from 0 to 8 and y from 0 to 90. Shows the curve θ = tan⁻¹(rω²/g); point ω = 4, θ = 39.2° at (4, 39.2).

Faster rotation lifts the mass higher, so the angle rises quickly at first and then levels off towards 90°.

Worked examples

Each example below was worked out by the solver on this page and checked by substituting the answer back into the formula.

Example 1: find the angle

A conical pendulum moves in a circle of radius 0.5 m at 4 rad s⁻¹. Find the angle of the string to the vertical.

Conical pendulum Answer checked
Answer
θ≈39.23 °\theta\approx 39.23\ \text{°}
  1. The formula
    Conical pendulum. In this formula is the angle of the string to the vertical, is the radius of the circle, is the angular speed.
  2. What we know and what we want
    We know and we want to find , the angle of the string to the vertical.
  3. Substitute the numbers
  4. Calculate
  5. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 2: find the radius

The string of a conical pendulum makes 45° with the vertical and the angular speed is 3 rad s⁻¹. Find the radius.

Conical pendulum Answer checked
Answer
r≈1.089 mr\approx 1.089\ \text{m}
  1. The formula
    Conical pendulum. In this formula is the angle of the string to the vertical, is the radius of the circle, is the angular speed.
  2. What we know and what we want
    We know and we want to find , the radius of the circle.
  3. Rearrange for
    Multiply by g, then divide by ω².
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 3: find the angular speed

A conical pendulum with string angle 30° moves in a circle of radius 0.8 m. Find its angular speed.

Conical pendulum Answer checked
Answer
ω≈2.659 rad s⁻¹\omega\approx 2.659\ \text{rad s⁻¹}
  1. The formula
    Conical pendulum. In this formula is the angle of the string to the vertical, is the radius of the circle, is the angular speed.
  2. What we know and what we want
    We know and we want to find , the angular speed.
  3. Rearrange for
    Multiply by g, divide by r, then take the square root.
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Special cases

A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.

The angle

r = 0.5, ω = 4: tan θ = 0.5 × 16 ÷ 9.8 = 0.816, so θ ≈ 39.2°

Horizontally T sin θ = mrω², and vertically T cos θ = mg.

The tension

m = 0.5: T = mg ÷ cos θ ≈ 6.3 N

The tension is greater than the weight.

The string length

l = r ÷ sin θ = 0.5 ÷ 0.632 ≈ 0.79 m

The radius of the circle is l sin θ.

The period

T = 2π ÷ ω = 2π ÷ 4 ≈ 1.57 s

One revolution takes 2π ÷ ω seconds.

The angle for r = 0.5 m
ω (rad s⁻¹)tan θθ
20.20411.6°
30.45924.7°
40.81639.2°
61.83761.4°

Word problems

Resolve the tension: T cos θ = mg vertically and T sin θ = mrω² horizontally. Divide to get tan θ = rω² ÷ g.

Finding the angle

A conical pendulum moves in a circle of radius 0.5 m with angular speed 4 rad s⁻¹. Find the angle of the string to the vertical.

  1. Use tan θ = rω² ÷ gtan θ = 0.5 × 16 ÷ 9.8 = 0.816
  2. Use the inverse tangentθ = 39.2°
  3. Check: tan 39.2° ≈ 0.816 ✓The angle is 39.2°.

Finding the tension and length

The 0.5 kg bob of the pendulum above moves at θ = 39.2° in a circle of radius 0.5 m. Find the tension and the string length.

  1. Vertically T cos θ = mgT = 0.5 × 9.8 ÷ cos 39.2° = 6.32 N
  2. The radius is l sin θl = 0.5 ÷ sin 39.2° = 0.79 m
  3. Check: T sin θ = 4.0 = 0.5 × 0.5 × 16 ✓T = 6.32 N and l = 0.79 m.

Finding the radius Higher

A conical pendulum has string angle 45° and angular speed 3 rad s⁻¹. Find the radius of the circle to 2 decimal places.

  1. Rearranger = g tan θ ÷ ω²
  2. Substituter = 9.8 × 1 ÷ 9
  3. Calculater = 1.09 m
  4. Check: tan 45° = 1.09 × 9 ÷ 9.8 ≈ 1 ✓The radius is 1.09 m.

Finding the angular speed Higher

A pendulum with string angle 30° moves in a circle of radius 0.8 m. Find the angular speed to 2 decimal places.

  1. Rearrangeω² = g tan θ ÷ r
  2. Substituteω² = 9.8 × 0.5774 ÷ 0.8 = 7.07
  3. Take the rootω = 2.66 rad s⁻¹
  4. Check: 0.8 × 2.66² ÷ 9.8 = 0.578 ≈ tan 30° ✓The angular speed is 2.66 rad s⁻¹.

Common mistakes

Using the tension as the centripetal force

T = mrω² ✗

only the horizontal component T sin θ equals mrω² ✓

The tension also has a vertical component.

Swapping sin and cos

T sin θ = mg and T cos θ = mrω² ✗

T cos θ = mg and T sin θ = mrω² ✓

θ is measured from the vertical.

Using degrees for ω

ω = 4 degrees per second ✗

ω must be in rad s⁻¹ ✓

The formula v = rω needs radians.

Forgetting to square ω

tan θ = rω ÷ g = 0.5 × 4 ÷ 9.8 = 0.204 ✗

tan θ = rω² ÷ g = 0.816 ✓

The acceleration is rω².

Using the string length as the radius

r = l ✗

r = l sin θ ✓

The circle is horizontal.

Using the calculator in radians

tan⁻¹ 0.816 = 0.68° ✗

in degree mode θ = 39.2° ✓

Check the mode.

Exam tips

  1. Draw the bob with the weight and the tension.
  2. Resolve the tension vertically and horizontally.
  3. Divide the equations to remove T and m.
  4. Use ω in rad s⁻¹.
  5. Remember r = l sin θ.
  6. Link to centripetal force.

Practice questions

Try each one on paper, then open the answer. Use the solver above to see the full working.

1. Use the formula to find the angle of the string to the vertical (t) when radius of the circle (r) = 1 m, angular speed (w) = 10 rad s⁻¹. Give your answer to 2 decimal places. Foundation

t = 84.4°

2. Find the radius of the circle (r) when angle of the string to the vertical (t) = 86.19°, angular speed (w) = 7 rad s⁻¹. Higher

r = 3 m

3. Find the angular speed (w) when angle of the string to the vertical (t) = 70.05°, radius of the circle (r) = 3 m. Higher

w = 3 rad s⁻¹

4. Use the formula to find the angle of the string to the vertical (t) when radius of the circle (r) = 3 m, angular speed (w) = 3 rad s⁻¹. Give your answer to 2 decimal places. Foundation

t = 70.05°

5. Find the radius of the circle (r) when angle of the string to the vertical (t) = 78.46°, angular speed (w) = 4 rad s⁻¹. Higher

r = 3 m

6. Find the angular speed (w) when angle of the string to the vertical (t) = 87.08°, radius of the circle (r) = 3 m. Higher

w = 8 rad s⁻¹

Practice generator

Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.

Solve: …

Key terms

Conical pendulum
A bob on a string that moves in a horizontal circle, so the string sweeps a cone.
Angular speed (ω)
The angle turned per second, in rad s⁻¹.
Tension (T)
The force in the string.
Radius (r)
The radius of the horizontal circle.
Angle of the string (θ)
The angle between the string and the vertical.
Period
The time for one revolution, 2π ÷ ω.
Centripetal force
The horizontal component of the tension.
Bob
The mass at the end of the string.

Frequently asked questions

What is the equation for a conical pendulum?

tan θ = rω² ÷ g, where θ is the angle of the string to the vertical.

How do you find the tension?

T = mg ÷ cos θ, from the vertical balance.

Why does the mass not matter?

It cancels when you divide the horizontal and vertical equations.

How do I find the period?

2π ÷ ω.

What happens if ω increases?

The string swings out to a larger angle.

Which page covers the force?

centripetal force.

More in Mechanics and the formula sheets.