Give every value except the one you want, or write the letter with a question mark, for example u=3, a=2, t=5 or s=40, u=0, t=4. Every answer is checked by putting it back into the formula.
s = u × t + 2 1 × a × t 2
s : displacement (m )u : initial velocity (m s⁻¹ )a : acceleration (m s⁻ 2 )t : time taken (s )
On this page
Before you start
This page is easier if you are comfortable with:
squaring numbers and multiplying decimals the equation v = u + at , which links to this one solving a quadratic equation, needed when time is the unknown
What SUVAT: s = ut + ½at² means
This SUVAT equation does not contain the final velocity v . It is useful when you are given (or asked for) the displacement but know nothing about the final speed.
The term u t is the distance the object would travel if it kept its initial velocity. The extra term 2 1 a t 2 is the extra distance gained because of the acceleration.
Finding t from this equation means solving a quadratic, which can give two answers. This calculator does not do that: use the quadratic formula page or the equation solver on the home page for that case. It combines with v = u + at, and the variants are s = half (u + v) t and s = vt minus half a t squared .
This page is part of Kinematics and SUVAT in Mechanics . Topics that work alongside it: SUVAT: v = u + at , SUVAT: s = ½(u + v)t , SUVAT: s = vt − ½at² , Variable acceleration: integrating , SUVAT: v² = u² + 2as , Weight and Variable acceleration: velocity and acceleration .
What is it used for? The equation s = ut + ½at² gives how far an object has moved when its acceleration is constant, without needing to know its final velocity.
Finding the distance a falling object drops in a given time. Finding the distance a vehicle covers while speeding up. Finding the acceleration of an object from a measured distance and time.
How to use the suvat: s = ut + ½at² formula
Write down s , u , a , t , marking the one you want. Check that v is not involved. Substitute with consistent signs and units. Rearrange for the unknown and calculate.
Graph Displacement against time: s = 3t + t² (u = 3, a = 2) s = 40 at t = 5 0 1 2 3 4 5 6 0 10 20 30 40 50 Displacement against time: s = 3t + t² (u = 3, a = 2) x y s = 3t + t² Graph with x from 0 to 6 and y from 0 to 56. Shows the curve s = 3t + t²; point s = 40 at t = 5 at (5, 40). The curve gets steeper as time goes on, because the object is speeding up. The gradient at any point is the velocity.
Worked examples
Each example below was worked out by the solver on this page and checked by substituting the answer back into the formula.
Example 1: find the displacement A skater at 3 m s⁻¹ accelerates at 2 m s⁻² for 5 s. How far does she travel?
Try this in the solver: u=3, a=2, t=5
SUVAT: s = ut + ½at² Answer checked
Answer
s = 40 m s=40\ \text{m} s = 40 m The formula
SUVAT: s = ut + ½at². In this formula s is the displacement, u is the initial velocity, a is the acceleration, t is the time taken.
s = u × t + 2 1 × a × t 2
What we know and what we want
We know u = 3 , a = 2 , t = 5 and we want to find s , the displacement.
Substitute the numbers
s = 3 × 5 + 2 1 × 2 × 5 2
Calculate
s = 40 m
Check by substituting back
Put all the values back into the original formula: both sides should match.
40 = 3 × 5 + 2 1 × 2 × 5 2 ✓
Example 2: find the acceleration A car starts from rest and travels 40 m in 4 s. Find its acceleration.
Try this in the solver: s=40, u=0, t=4
SUVAT: s = ut + ½at² Answer checked
Answer
a = 5 m s⁻ 2 a=5\ \text{m s⁻}^{2} a = 5 m s⁻ 2 The formula
SUVAT: s = ut + ½at². In this formula s is the displacement, u is the initial velocity, a is the acceleration, t is the time taken.
s = u × t + 2 1 × a × t 2
What we know and what we want
We know s = 40 , u = 0 , t = 4 and we want to find a , the acceleration.
Rearrange for a
Subtract ut from both sides, multiply by 2, then divide by t².
a = t 2 2 × ( s − u × t )
Substitute the numbers
a = 4 2 2 × ( 40 − 0 × 4 )
Calculate
a = 5 m s⁻ 2
Check by substituting back
Put all the values back into the original formula: both sides should match.
40 = 0 × 4 + 2 1 × 5 × 4 2 ✓
Example 3: find the initial velocity A ball rolls 60 m in 6 s with an acceleration of 1.5 m s⁻². Find its initial velocity.
Try this in the solver: s=60, a=1.5, t=6
SUVAT: s = ut + ½at² Answer checked
Answer
u = 5.5 m s⁻¹ u=5.5\ \text{m s⁻¹} u = 5.5 m s⁻¹ The formula
SUVAT: s = ut + ½at². In this formula s is the displacement, u is the initial velocity, a is the acceleration, t is the time taken.
s = u × t + 2 1 × a × t 2
What we know and what we want
We know s = 60 , a = 1.5 , t = 6 and we want to find u , the initial velocity.
Rearrange for u
Subtract ½at² from both sides, then divide by t.
u = t s − 2 1 × a × t 2
Substitute the numbers
u = 6 60 − 2 1 × 1.5 × 6 2
Calculate
u = 5.5 m s⁻¹
Check by substituting back
Put all the values back into the original formula: both sides should match.
60 = 5.5 × 6 + 2 1 × 1.5 × 6 2 ✓
Special cases
A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.
Starting from rest u = 0: s = ½at², so a = 2 and t = 5 give s = 25
The ut term is zero.
No acceleration a = 0: s = ut, so u = 8 and t = 5 give s = 40
The object moves at constant velocity.
Finding the time s = 24, u = 2, a = 4: 2t² + 2t − 24 = 0, so t² + t − 12 = 0 and t = 3
Solve the quadratic and reject the negative root.
A negative displacement u = 10, a = −4, t = 6: s = 60 − 72 = −12
The object ends up behind its starting point.
The two parts of s = ut + ½at² (u = 3, a = 2, t = 5) Part Meaning Value ut distance if the velocity stayed at u 15 ½at² extra distance because of the acceleration 25 s total displacement 40
Word problems
Write down s, u, a and t, choose s = ut + ½at² because v is not involved, substitute carefully, and give the answer with units.
A car pulling away A car starts from rest and accelerates at 2 m s⁻² for 5 s. How far does it travel?
Write the equation with u = 0 s = ut + ½at² = ½at² Substitute s = ½ × 2 × 5² Calculate s = 25 m Check: the final speed is 10 m s⁻¹, the average speed is 5 m s⁻¹ and 5 × 5 = 25 ✓ The car travels 25 m.
A cyclist speeding up A cyclist travelling at 3 m s⁻¹ accelerates at 2 m s⁻² for 5 s. Find the displacement.
Substitute s = 3 × 5 + ½ × 2 × 5² The two parts s = 15 + 25 Add s = 40 m Check: v = 3 + 2 × 5 = 13, and ½ × (3 + 13) × 5 = 40 ✓ The displacement is 40 m.
Finding the acceleration Higher A trolley starts from rest and travels 40 m in 4 s. Find its acceleration.
Substitute into s = ½at² 40 = ½ × a × 16 Rearrange a = 2 × 40 ÷ 16 Calculate a = 5 m s⁻² Check: ½ × 5 × 16 = 40 ✓ The acceleration is 5 m s⁻².
Finding the time Higher A ball rolling at 2 m s⁻¹ down a slope accelerates at 4 m s⁻² and covers 24 m. How long does this take?
Substitute 24 = 2t + ½ × 4 × t² = 2t + 2t² Rearrange to a quadratic t² + t − 12 = 0 Factorise (t + 4)(t − 3) = 0 Time cannot be negative t = 3 s Check: 2 × 3 + 2 × 9 = 24 ✓ It takes 3 s.
Common mistakes
Forgetting to square the time u = 3, a = 2, t = 5: s = 15 + ½ × 2 × 5 = 20 ✗
s = 15 + ½ × 2 × 5² = 40 ✓
The second term has t², not t.
Leaving out the half s = 15 + 2 × 5² = 65 ✗
s = 15 + ½ × 2 × 5² = 40 ✓
Without the ½ the acceleration part is doubled.
Using it for non-constant acceleration applying s = ut + ½at² when the acceleration changes ✗
check that the acceleration is constant ✓
All SUVAT equations assume constant acceleration.
Confusing displacement with distance a ball thrown up at 14 m s⁻¹ is back at the start after 2.86 s, so it travelled 0 m ✗
its displacement is 0, but it travelled 10 m up and 10 m down, 20 m in all ✓
Displacement is a change in position. Distance adds up the whole path.
Rearranging for a without doubling s = 40, u = 0, t = 4: a = s ÷ t² = 2.5 ✗
a = 2s ÷ t² = 5 ✓
Multiply by 2 because of the half in the formula.
Keeping a negative time t² + t − 12 = 0 gives t = −4 or t = 3, so both are answers ✗
only t = 3 makes sense ✓
A time cannot be negative.
Exam tips
List s, u, v, a and t and cross off the one you do not need: here it is v.
Square t before you multiply by a and ½.
Check signs of u and a before you substitute.
For the time, form a quadratic and reject a negative root.
Check with another equation, for example s = ½(u + v)t, once you know v.
Give a sign with the displacement: negative means behind the start.
Practice questions
Try each one on paper, then open the answer. Use the solver above to see the full working.
1. Use the formula to find the displacement (s) when initial velocity (u) = 2 m s⁻¹, acceleration (a) = 2 m s⁻², time taken (t) = 3 s. Foundation s = 15 m
2. Find the initial velocity (u) when displacement (s) = 102.5 m, acceleration (a) = 7 m s⁻², time taken (t) = 5 s. Higher u = 3 m s⁻¹
3. Find the acceleration (a) when displacement (s) = 60 m, initial velocity (u) = 7 m s⁻¹, time taken (t) = 5 s. Higher a = 2 m s⁻²
4. Use the formula to find the displacement (s) when initial velocity (u) = 7 m s⁻¹, acceleration (a) = 3 m s⁻², time taken (t) = 3 s. Foundation s = 34.5 m
5. Find the initial velocity (u) when displacement (s) = 63 m, acceleration (a) = 2 m s⁻², time taken (t) = 7 s. Higher u = 2 m s⁻¹
6. Find the acceleration (a) when displacement (s) = 30 m, initial velocity (u) = 9 m s⁻¹, time taken (t) = 2 s. Higher a = 6 m s⁻²
Practice generator Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.
Foundation Higher Mixed New question
Solve: …
The practice generator needs JavaScript.
Key terms
Displacement (s) The change in position, in metres, with a direction. Initial velocity (u) The velocity at the start, in m s⁻¹. Acceleration (a) The change in velocity each second, in m s⁻². Time (t) The duration of the motion, in seconds. Constant acceleration An acceleration that does not change. Distance The total length of the path, never negative. Quadratic equation An equation with a squared term, such as 2t² + 2t − 24 = 0. Uniform velocity Constant velocity, so the acceleration is zero.
Frequently asked questions
What is the SUVAT formula for displacement? s = ut + ½at², where s is the displacement, u the initial velocity, a the acceleration and t the time.
When do you use s = ut + ½at²? When the final velocity v is not given and not wanted. Otherwise see v = u + at or s = ½(u + v)t.
Why is there a half in the formula? The velocity changes steadily, so the average extra velocity from acceleration is half of at. Multiplying by t gives ½at².
What does s = ut + ½at² mean? The ut term is the distance covered at the initial velocity, and the ½at² term is the extra distance from accelerating.
How do I find the time from this equation? Rearrange to ½at² + ut − s = 0 and solve the quadratic, keeping the positive root.
Can displacement be negative? Yes. It means the object is behind its starting point. See s = vt − ½at² for the version that uses v.