Projectile: Maximum Height Formula Solver with Worked Examples

The greatest height of a projectile launched at speed and angle is . The calculator finds , or .

Write 2x or 2*x to multiply, ^ for powers, and ; between simultaneous equations. You can also type factor, expand, derivative of, integrate … from a to b, limit … as x->0 or 15% of 80.

Try an example

Give every value except the one you want, or write the letter with a question mark, for example u=25, q=60 or H=10, q=45. Every answer is checked by putting it back into the formula.

  • : maximum height ()
  • : speed of projection ()
  • : angle of projection above the horizontal ()

Before you start

This page is easier if you are comfortable with:

What Projectile: maximum height means

At the highest point the vertical velocity is zero. Using vertically with , initial vertical speed and gives .

Only the vertical part of the velocity matters for the height. A steeper launch gives a greater height, with the maximum when the projectile is fired straight up: .

The horizontal velocity is unchanged at the top, so the speed there is , not zero. The time to the top is half of time of flight, the vertical speed comes from v squared = u squared + 2as, and the horizontal travel is range on level ground.

This page is part of Projectiles in Mechanics. Topics that work alongside it: Projectile: time of flight, Projectile: range on level ground, SUVAT: v² = u² + 2as, Projectile: equation of the trajectory, Projectile: horizontal and vertical motion and Vector form of motion.

What is it used for?

The maximum height depends only on the vertical part of the launch speed. At the top, the vertical velocity is zero.

How to use the projectile: maximum height formula

  1. Use the vertical motion only.
  2. Put the vertical velocity at the top equal to 0.
  3. Apply with .
  4. Rearrange for , or .

Graph

A launch at 25 m s⁻¹ at 60°H = 23.9 m05101520253035404550550510152025A launch at 25 m s⁻¹ at 60°horizontal distance x (m)height y (m)trajectoryGraph with x from 0 to 56 and y from 0 to 26. Shows the curve trajectory; point H = 23.9 m at (27.6, 23.9).

The highest point is halfway along the path, because the parabola is symmetrical.

Worked examples

Each example below was worked out by the solver on this page and checked by substituting the answer back into the formula.

Example 1: find the maximum height

A projectile is launched at 25 m s⁻¹ at 60° to the horizontal. Find its greatest height.

Projectile: maximum height Answer checked
Answer
H≈23.92 mH\approx 23.92\ \text{m}
  1. The formula
    Projectile: maximum height. In this formula is the maximum height, is the speed of projection, is the angle of projection above the horizontal.
  2. What we know and what we want
    We know and we want to find , the maximum height.
  3. Substitute the numbers
  4. Calculate
  5. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 2: find the speed

A ball reaches a greatest height of 10 m when launched at 45°. Find its launch speed.

Projectile: maximum height Answer checked
Answer
u=14.0×2≈19.8 m s⁻¹u=14.0 \times \sqrt{2} \approx 19.8\ \text{m s⁻¹}
  1. The formula
    Projectile: maximum height. In this formula is the maximum height, is the speed of projection, is the angle of projection above the horizontal.
  2. What we know and what we want
    We know and we want to find , the speed of projection.
  3. Rearrange for
    Multiply by 2g, take the square root, then divide by sin α.
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 3: find the angle

A projectile launched at 30 m s⁻¹ reaches a greatest height of 15 m. Find the angle of projection.

Projectile: maximum height Answer checked
Answer
α≈34.86 °\alpha\approx 34.86\ \text{°}
  1. The formula
    Projectile: maximum height. In this formula is the maximum height, is the speed of projection, is the angle of projection above the horizontal.
  2. What we know and what we want
    We know and we want to find , the angle of projection above the horizontal.
  3. Rearrange for
    Multiply by 2g, take the square root, divide by u, then use the inverse sine.
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Special cases

A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.

A 60° throw

u = 25, θ = 60°: H = 625 × 0.75 ÷ 19.6 ≈ 23.92 m

Only the vertical component u sin θ matters for the height.

Thrown straight up

θ = 90°, u = 14: H = 196 ÷ 19.6 = 10 m

sin 90° = 1, so H = u² ÷ 2g.

At the top

the vertical velocity is 0, and the horizontal velocity is still u cos θ

The projectile is moving horizontally at the highest point.

Time to the top

t = u sin θ ÷ g: 20 sin 30° ÷ 9.8 ≈ 1.02 s

This is half the time of flight on level ground.

Maximum height for u = 20 m s⁻¹
AngleH (m)
15°1.37
30°5.1
45°10.2
60°15.31
90°20.41

Word problems

At the top the vertical velocity is zero, so use v² = (u sin θ)² − 2gH = 0, giving H = u² sin²θ ÷ 2g.

Finding the height

A ball is thrown at 25 m s⁻¹ at 60° above the horizontal. Find its maximum height to 2 decimal places.

  1. Write the formulaH = u² sin²θ ÷ 2g
  2. SubstituteH = 625 × (0.8660)² ÷ 19.6
  3. CalculateH = 23.92 m
  4. Check: the vertical velocity is 21.65 m s⁻¹, and 21.65² ÷ 19.6 = 23.92 ✓The maximum height is 23.92 m.

Finding the speed

A ball projected at 45° rises to a maximum height of 10 m. Find its speed of projection to 2 decimal places.

  1. Rearrangeu = √(2gH) ÷ sin θ
  2. Substituteu = √(196) ÷ 0.7071
  3. Calculateu = 14 ÷ 0.7071 = 19.80 m s⁻¹
  4. Check: the vertical velocity 14 m s⁻¹ gives 14² ÷ 19.6 = 10 ✓The speed is 19.80 m s⁻¹.

Finding the angle Higher

A ball projected at 30 m s⁻¹ rises 15 m. Find the angle of projection to the nearest degree.

  1. The vertical velocity needed√(2gH) = √294 = 17.15 m s⁻¹
  2. Rearrangesin θ = 17.15 ÷ 30 = 0.5716
  3. Use the inverse sineθ = 35°
  4. Check: 30² × sin²35° ÷ 19.6 = 15.1 ≈ 15 ✓The angle is about 35°.

Height and time Higher

A ball is thrown at 20 m s⁻¹ at 30°. Find the time to reach its highest point and the maximum height.

  1. Vertical velocityu sin θ = 10 m s⁻¹
  2. Time to the top, with v = 0t = 10 ÷ 9.8 = 1.02 s
  3. Maximum heightH = 10² ÷ 19.6 = 5.10 m
  4. Check: s = ½(10 + 0) × 1.02 = 5.10 ✓The time is 1.02 s and the height is 5.10 m.

Common mistakes

Forgetting to square the sine

H = 625 × 0.866 ÷ 19.6 = 27.62 ✗

H = 625 × 0.75 ÷ 19.6 = 23.92 ✓

The height uses sin²θ.

Using cosine

H = 625 × cos²60° ÷ 19.6 = 7.97 ✗

H = 625 × sin²60° ÷ 19.6 = 23.92 ✓

The height depends on the vertical component.

Forgetting the 2 in 2g

H = u² sin²θ ÷ g = 47.84 ✗

H = u² sin²θ ÷ 2g = 23.92 ✓

The denominator is 2g.

Using the full speed

H = 25² ÷ 19.6 = 31.89 ✗

use the vertical component only: 23.92 ✓

The horizontal part does not affect the height.

Calculator in radians

sin 60 = −0.305 ✗

in degree mode sin 60° = 0.866 ✓

Check the mode.

Saying the speed is zero at the top

the projectile stops at the top ✗

only the vertical velocity is zero ✓

The horizontal velocity stays u cos θ.

Exam tips

  1. Use the vertical component u sin θ only.
  2. Put v = 0 at the top in the SUVAT equation.
  3. Use H = u² sin²θ ÷ 2g.
  4. Use degree mode.
  5. Check with the time to the top t = u sin θ ÷ g.
  6. Compare with range on level ground.

Practice questions

Try each one on paper, then open the answer. Use the solver above to see the full working.

1. Use the formula to find the maximum height (H) when speed of projection (u) = 14 m s⁻¹, angle of projection above the horizontal (q) = 18°. Give your answer to 2 decimal places. Foundation

H = 0.95 m

2. Use the formula to find the maximum height (H) when speed of projection (u) = 13 m s⁻¹, angle of projection above the horizontal (q) = 21°. Give your answer to 2 decimal places. Foundation

H = 1.11 m

3. Use the formula to find the maximum height (H) when speed of projection (u) = 5 m s⁻¹, angle of projection above the horizontal (q) = 12°. Give your answer to 2 decimal places. Foundation

H = 0.06 m

4. Use the formula to find the maximum height (H) when speed of projection (u) = 12 m s⁻¹, angle of projection above the horizontal (q) = 19°. Give your answer to 2 decimal places. Foundation

H = 0.78 m

5. Use the formula to find the maximum height (H) when speed of projection (u) = 14 m s⁻¹, angle of projection above the horizontal (q) = 17°. Give your answer to 2 decimal places. Foundation

H = 0.85 m

6. Use the formula to find the maximum height (H) when speed of projection (u) = 16 m s⁻¹, angle of projection above the horizontal (q) = 10°. Give your answer to 2 decimal places. Foundation

H = 0.39 m

Practice generator

Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.

Solve: …

Key terms

Maximum height (H)
The greatest height above the launch point.
Vertical component
u sin θ.
Highest point
Where the vertical velocity is zero.
Time to the top
u sin θ ÷ g.
Angle of projection
The angle above the horizontal.
Gravity (g)
9.8 m s⁻².
Horizontal component
u cos θ, constant throughout.
Projectile
An object moving only under gravity.

Frequently asked questions

What is the maximum height of a projectile?

H = u² sin²θ ÷ 2g.

Why is it sin squared?

The height uses v² = u² + 2as with the vertical component u sin θ squared.

What is the velocity at the highest point?

It is horizontal, with size u cos θ.

How do I find the speed from the height?

Rearrange to u = √(2gH) ÷ sin θ.

Which angle gives the greatest height?

90°, throwing straight up.

How is this linked to the range?

See range on level ground and time of flight.

More in Mechanics and the formula sheets.