Pressure Calculator with Worked Examples

Pressure is force divided by the area it acts on: . Use the calculator to find the pressure, the force or the area.

Write 2x or 2*x to multiply, ^ for powers, and ; between simultaneous equations. You can also type factor, expand, derivative of, integrate … from a to b, limit … as x->0 or 15% of 80.

Try an example

Give every value except the one you want, or write the letter with a question mark, for example F=500, A=0.25 or P=3000, A=0.4. Every answer is checked by putting it back into the formula.

  • : pressure
  • : force
  • : area the force acts on

Before you start

This page is easier if you are comfortable with:

  • force in newtons
  • area in square metres
  • converting cm² to m²

What Pressure means

The same force gives a bigger pressure when it is spread over a smaller area, which is why a sharp knife cuts better than a blunt one.

In SI units force is in newtons (N), area in square metres (m²) and pressure in pascals (Pa), where 1 Pa = 1 N/m².

Rearranged, force = pressure × area and area = force ÷ pressure. Pressure is force over area, for instance of a circle, is a compound measure like density and speed, and similar rates are in average speed.

This page is part of Speed, density and compound measures in Ratio, proportion and money. Topics that work alongside it: Density, Speed, distance, time, Area of a circle, Speed–time graph: acceleration and distance, Price including VAT (20%) and Distance–time graph: speed is the gradient.

What is it used for?

Pressure is force spread over an area: pressure = force ÷ area.

How to use the pressure formula

  1. Write the force in newtons and the area in square metres.
  2. Choose the right form of the formula.
  3. Substitute and calculate.
  4. State the unit, such as N/m² or Pa.

Graph

Pressure p = F/A for a force of 100 N4 m²: 25 Pa2468101214161820020406080100Pressure p = F/A for a force of 100 Narea (m²)pressure (Pa)p = 100/AGraph with x from 1 to 20 and y from 0 to 105. Shows the curve p = 100/A; point 4 m²: 25 Pa at (4, 25).

The same force on a smaller area gives a larger pressure.

Worked examples

Each example below was worked out by the solver on this page and checked by substituting the answer back into the formula.

Example 1: find the pressure

A force of 500 N acts on an area of 0.25 m². Find the pressure.

Pressure Answer checked
Answer
P=2000P=2000
  1. The formula
    Pressure. In this formula is the pressure, is the force, is the area the force acts on.
  2. What we know and what we want
    We know and we want to find , the pressure.
  3. Substitute the numbers
  4. Calculate
  5. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 2: find the force

The pressure is 3000 N/m² on an area of 0.4 m². Find the force.

Pressure Answer checked
Answer
F=1200F=1200
  1. The formula
    Pressure. In this formula is the pressure, is the force, is the area the force acts on.
  2. What we know and what we want
    We know and we want to find , the force.
  3. Rearrange for
    Multiply both sides by A.
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 3: find the area

A force of 900 N creates a pressure of 1800 N/m². Find the area.

Pressure Answer checked
Answer
A=0.5A=0.5
  1. The formula
    Pressure. In this formula is the pressure, is the force, is the area the force acts on.
  2. What we know and what we want
    We know and we want to find , the area the force acts on.
  3. Rearrange for
    Multiply both sides by A, then divide by P.
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Special cases

A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.

The pressure

F = 500 N on 0.25 m²: P = 2000 Pa

P = F ÷ A.

The force

P = 3000 Pa, A = 0.4 m²: F = 1200 N

F = P × A.

The area

F = 900 N, P = 1800 Pa: A = 0.5 m²

A = F ÷ P.

Changing units

2500 cm² = 0.25 m²

Divide by 10 000.

Word problems

Pressure = force ÷ area. One newton per square metre is one pascal.

The pressure

A force of 500 N acts on 0.25 m². Find the pressure.

  1. Divide500 ÷ 0.25
  2. Calculate2000 Pa
  3. Check: 2000 × 0.25 = 500 ✓2000 Pa.

The force

A pressure of 3000 Pa acts on 0.4 m². Find the force.

  1. Multiply3000 × 0.4
  2. Calculate1200 N
  3. Check: 1200 ÷ 0.4 = 3000 ✓1200 N.

The area Higher

A force of 900 N gives pressure 1800 Pa. Find the area.

  1. Divide900 ÷ 1800
  2. Calculate0.5 m²
  3. Check: 1800 × 0.5 = 900 ✓0.5 m².

Units Higher

A 500 N force acts on 2500 cm². Find the pressure in Pa.

  1. Convert2500 cm² = 0.25 m²
  2. Divide500 ÷ 0.25 = 2000 Pa
  3. Check: 0.25 × 2000 = 500 ✓2000 Pa.

Common mistakes

Area over force

P = 0.25 ÷ 500 ✗

P = 500 ÷ 0.25 ✓

Force goes on top.

Using cm² directly

500 ÷ 2500 = 0.2 Pa ✗

convert to 0.25 m² first ✓

Pascal uses m².

Multiplying

P = 500 × 0.25 = 125 ✗

P = 500 ÷ 0.25 ✓

Divide.

Forgetting weight is a force

using mass in kg ✗

F = mg in newtons ✓

Convert mass to weight.

Exam tips

  1. P = F ÷ A.
  2. Convert to m² and N.
  3. Smaller area: more pressure.
  4. Weight = mg.
  5. 1 Pa = 1 N/m².

Practice questions

Try each one on paper, then open the answer. Use the solver above to see the full working.

1. A force of 200 N acts on 0.5 m². Find the pressure Foundation

400 Pa

2. A pressure of 500 Pa acts on 2 m². Find the force Foundation

1000 N

3. A force of 600 N gives 1200 Pa. Find the area Foundation

0.5 m²

4. A 60 kg person stands on 0.04 m². Find the pressure (g = 9.8) Higher

588 ÷ 0.04 = 14 700 Pa

5. A force of 1000 N acts on 500 cm². Find the pressure in Pa Higher

1000 ÷ 0.05 = 20 000

6. Pressure 250 Pa on 0.8 m². Find the force Higher

200 N

Practice generator

Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.

Solve: …

Key terms

Pressure
Force per unit area.
Pascal (Pa)
1 N/m².
Force
A push or pull, in newtons.
Area
The surface the force acts on.
Weight
Mass × gravity.
Newton (N)
The unit of force.

Frequently asked questions

What is the pressure formula?

P = F ÷ A.

What is a pascal?

One newton per square metre.

Why do stilettos exert high pressure?

The area is small.

How do I find force?

F = P × A.

How do I convert cm² to m²?

Divide by 10 000.

Which page covers density?

density.

More in Ratio, proportion and money and the formula sheets.