Angle Between Two Planes Explained with Worked Examples

The angle between two planes equals the angle between their normals: .

Write 2x or 2*x to multiply, ^ for powers, and ; between simultaneous equations. You can also type factor, expand, derivative of, integrate … from a to b, limit … as x->0 or 15% of 80.

Try an example

Before you start

This page is easier if you are comfortable with:

What Angle between two planes means

Read the normals from the coefficients of the Cartesian equations, then use the scalar product. The absolute value gives the acute angle between the planes.

If the normals are multiples of each other the planes are parallel. If their scalar product is zero the planes are perpendicular, and the angle is a right angle.

Two non-parallel planes meet in a line, whose direction is found with the cross product of the normals. The planes are usually written as a Cartesian equation, the angle comes from a scalar product of the normals, and the matching result for lines is the angle between two lines.

What is it used for?

The angle between two planes is the angle at which they meet along their line of intersection. It equals the angle between their normals.

How to use angle between two planes

  1. Write each plane as and read the normal .
  2. Compute the scalar product of the normals and their lengths.
  3. Find with an absolute value.
  4. Take the inverse cosine.

Graph

Two planes seen edge-on meet at an angleline of intersection-4-3-2-101234-101234Two planes seen edge-on meet at an anglexyplane 1plane 2Graph with x from -4 to 4 and y from -1 to 4. Shows the curve plane 1; the curve plane 2; point line of intersection at (0, 0).

Seen along their common line, the planes appear as two lines meeting at the angle between them.

Worked examples

These examples are worked by hand, step by step, so you can compare your own working.

Example 1: 45° between planes

Find the angle between and .

Worked example
Answer
45∘45^{\circ}
  1. Normals (1,0,0) and (1,1,0)

Example 2: two oblique planes

Find the angle between and .

Worked example
Answer
63.6∘63.6^{\circ}
  1. Scalar product of the normals
  2. Lengths
  3. cos θ

Example 3: a floor and a slope

Find the angle between and .

Worked example
Answer
36.9∘36.9^{\circ}
  1. Normals (0,0,1) and (0,3,4)

Special cases

A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.

A plane and the base plane

x + y + z = 1 and z = 0: n₁ = (1, 1, 1), n₂ = (0, 0, 1), cos θ = 1/√3, so θ ≈ 54.7°

Read each normal from the coefficients.

Perpendicular planes

x = 3 and y = 5: n₁·n₂ = 0, so θ = 90°

A zero scalar product of the normals means perpendicular planes.

Parallel planes

n₁ = (1, 2, 2), n₂ = (2, 4, 4): n₁·n₂ = 18, |n₁||n₂| = 3 × 6 = 18, so cos θ = 1

Parallel normals give an angle of 0°.

Reading the normal

2x − y + 2z = 7 has normal (2, −1, 2)

The right-hand side does not affect the normal.

Angles between some planes
PlanesNormalsAngle
x + y + z = 1 and z = 0(1, 1, 1) and (0, 0, 1)54.7°
x = 3 and y = 5(1, 0, 0) and (0, 1, 0)90°
x + y = 2 and x = 0(1, 1, 0) and (1, 0, 0)45°
2x + 2y + z = 1 and z = 0(2, 2, 1) and (0, 0, 1)70.5°

Word problems

Read the two normals from the equations, work out the scalar product and the lengths, then use cos θ = |n₁·n₂| ÷ (|n₁||n₂|).

A 45° angle

Find the angle between the planes x + y = 2 and x = 0.

  1. The normalsn₁ = (1, 1, 0) and n₂ = (1, 0, 0)
  2. The scalar product and lengthsn₁·n₂ = 1, |n₁| = √2 and |n₂| = 1
  3. Use the formulacos θ = 1 ÷ √2, so θ = 45°
  4. Check: cos 45° = 0.707 = 1/√2 ✓The angle is 45°.

Two oblique planes

Find the angle between 2x + 2y + z = 1 and x + 2y + 2z = 4 to 1 decimal place.

  1. The normalsn₁ = (2, 2, 1) and n₂ = (1, 2, 2)
  2. The scalar productn₁·n₂ = 2 + 4 + 2 = 8
  3. The lengths|n₁| = 3 and |n₂| = 3
  4. Use the formulacos θ = 8 ÷ 9, so θ = 27.3°
  5. Check: cos 27.3° ≈ 0.889 = 8/9 ✓The angle is 27.3°.

A sloping plane Higher

A sloping plane has equation y − 2z = 0. Find the angle between it and the horizontal plane z = 0 to 1 decimal place.

  1. The normalsn₁ = (0, 1, −2) and n₂ = (0, 0, 1)
  2. The scalar product and lengthsn₁·n₂ = −2, |n₁| = √5 and |n₂| = 1
  3. Take the absolute valuecos θ = 2 ÷ √5 = 0.8944, so θ = 26.6°
  4. Check: tan θ = 1/2, and the slope y = 2z rises 1 for each 2 along ✓The angle is 26.6°.

Are they perpendicular? Higher

Show that the planes x + 2y − z = 3 and 3x − y + z = 5 are perpendicular.

  1. The normalsn₁ = (1, 2, −1) and n₂ = (3, −1, 1)
  2. The scalar productn₁·n₂ = 3 − 2 − 1 = 0
  3. Check: a zero scalar product means the normals, and so the planes, are perpendicular ✓The planes are perpendicular.

Common mistakes

Using points in the plane instead of normals

using a point on each plane ✗

use the normals, read from the coefficients ✓

The angle between planes depends only on their orientations.

Forgetting the absolute value

n₁·n₂ = −8, so cos θ = −8/9 and θ = 152.7° ✗

cos θ = 8/9, so θ = 27.3° ✓

The angle between two planes is taken as the acute angle.

Using direction vectors in the planes

taking vectors that lie in the planes ✗

take the normal vectors ✓

Vectors in the planes do not give the angle directly.

A length slip

|(2, 2, 1)| = 4 ✗

|(2, 2, 1)| = √9 = 3 ✓

Add the squares, 4 + 4 + 1 = 9, then take the root.

Reading the normal wrongly

2x − y + 2z = 7 has normal (2, −1, 7) ✗

the normal is (2, −1, 2) ✓

The normal uses the coefficients of x, y and z, not the right-hand side.

Using sine instead of cosine

sin θ = 8/9, so θ = 62.7° ✗

cos θ = 8/9, so θ = 27.3° ✓

For two planes the angle between the normals is the angle between the planes.

Exam tips

  1. Write the normals next to each equation.
  2. Work out three numbers: n₁·n₂, |n₁| and |n₂|.
  3. Take the absolute value for the acute angle.
  4. Check for special cases: parallel normals give 0°, and a scalar product of 0 gives 90°.
  5. Use degree mode and give the angle to 1 decimal place.
  6. For the line where the planes meet, see the direction of the line of intersection.

Practice questions

Try each one on paper, then open the answer. Use the solver above to see the full working.

1. Find the angle between x + y + z = 1 and z = 0 to 1 decimal place Foundation

cos θ = 1/√3, so θ = 54.7°

2. Find the angle between x = 0 and y = 0 Foundation

The normals are (1, 0, 0) and (0, 1, 0), so the angle is 90°

3. Find the angle between 3x + 4y = 5 and x = 0 to 1 decimal place Foundation

cos θ = 3/5, so θ = 53.1°

4. Find the angle between x + y + z = 6 and x − y + z = 2 to 1 decimal place Higher

n₁·n₂ = 1 − 1 + 1 = 1 and each length is √3, so cos θ = 1/3 and θ = 70.5°

5. Are the planes x + 2y + 2z = 1 and 2x + 4y + 4z = 7 parallel? Higher

The normals are (1, 2, 2) and (2, 4, 4), so |n₁·n₂| ÷ (|n₁||n₂|) = 18 ÷ 18 = 1 and yes

6. Find the angle between 2x − y + 2z = 7 and x + 2y − 2z = 1 to 1 decimal place Higher

n₁·n₂ = 2 − 2 − 4 = −4, |n₁| = |n₂| = 3, so cos θ = 4/9 and θ = 63.6°

Practice generator

Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.

Solve: …

Key terms

Plane
A flat surface that extends forever.
Normal
A vector at right angles to a plane.
Cartesian equation
ax + by + cz = d, with normal (a, b, c). See Cartesian equation of a plane.
Scalar product
The sum of the products of matching components.
Parallel planes
Planes whose normals are multiples of each other.
Perpendicular planes
Planes whose normals have a zero scalar product.
Line of intersection
The line where two non-parallel planes meet.
Acute angle
An angle less than 90°.

Frequently asked questions

How do you find the angle between two planes?

Find the normals n₁ and n₂ and use cos θ = |n₁·n₂| ÷ (|n₁||n₂|).

Why is the angle between planes the angle between normals?

Turning a plane through some angle turns its normal through the same angle, so the two angles match.

What is the normal of ax + by + cz = d?

The normal is (a, b, c).

When are two planes parallel?

When their normals are multiples of each other. The angle between them is 0°.

When are planes perpendicular?

When n₁·n₂ = 0.

How is it related to lines?

It uses the same method as the angle between two lines and the angle between a line and a plane.

More in Vectors and matrices and the formula sheets.