Circle: General Form Formula Solver with Worked Examples

The circle has centre and radius . Use the calculator to find the radius or .

Write 2x or 2*x to multiply, ^ for powers, and ; between simultaneous equations. You can also type factor, expand, derivative of, integrate … from a to b, limit … as x->0 or 15% of 80.

Try an example

Give every value except the one you want, or write the letter with a question mark, for example g=-3, f=4, c=0 or g=2, f=-1, c=-4. Every answer is checked by putting it back into the formula.

  • : radius
  • : half the coefficient of x
  • : half the coefficient of y
  • : constant term

Before you start

This page is easier if you are comfortable with:

What Circle: general form means

Completing the square on and turns the general form into . Comparing with gives centre and .

If is not positive, the equation does not describe a real circle.

Take care: the coefficients of and are and , so halve them first. Completing the square gives the centre-radius form in the equation of a circle, the radius can be checked with the distance between two points, and tangents use distance from a point to a line.

This page is part of Coordinate geometry in Geometry and measures. Topics that work alongside it: Equation of a circle, Equation of a circle (centre origin), Completing the square (a = 1), Distance from a point to a line (2D, coordinates), Point dividing a line in the ratio m : n and Arc length.

What is it used for?

The general form x² + y² + 2gx + 2fy + c = 0 describes a circle with centre (−g, −f) and radius √(g² + f² − c).

How to use the circle: general form formula

  1. Compare the equation with .
  2. Find , and by halving the coefficients.
  3. The centre is .
  4. The radius is .

Graph

x² + y² − 4x + 2y − 4 = 0: centre (2, −1), radius 3centre (2, −1)-3-2-101234567-4-2024x² + y² − 4x + 2y − 4 = 0: centre (2, −1), radius 3xyGraph with x from -3 to 7 and y from -5 to 4. Shows the curve y = -1+sqrt(9-(x-2)^2); the curve y = -1-sqrt(9-(x-2)^2); point centre (2, −1) at (2, -1).

Here g = −2, f = 1, c = −4, so the centre is (2, −1) and the radius is √(4 + 1 + 4) = 3.

Worked examples

Each example below was worked out by the solver on this page and checked by substituting the answer back into the formula.

Example 1: find the radius

The circle has , , . Find its radius.

Circle: general form Answer checked
Answer
r=5r=5
  1. The formula
    Circle: general form. In this formula is the radius, is the half the coefficient of x, is the half the coefficient of y, is the constant term.
  2. What we know and what we want
    We know and we want to find , the radius.
  3. Substitute the numbers
  4. Calculate
  5. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 2: another radius

Find the radius of .

Circle: general form Answer checked
Answer
r=3r=3
  1. The formula
    Circle: general form. In this formula is the radius, is the half the coefficient of x, is the half the coefficient of y, is the constant term.
  2. What we know and what we want
    We know and we want to find , the radius.
  3. Substitute the numbers
  4. Calculate
  5. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 3: find the constant

A circle with , has radius 5. Find .

Circle: general form Answer checked
Answer
c=0c=0
  1. The formula
    Circle: general form. In this formula is the radius, is the half the coefficient of x, is the half the coefficient of y, is the constant term.
  2. What we know and what we want
    We know and we want to find , the constant term.
  3. Rearrange for
    Rearrange the formula to make c the subject.
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Special cases

A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.

The radius

x² + y² − 6x + 8y = 0: g = −3, f = 4, c = 0, so r = 5

r² = g² + f² − c.

Another circle

g = 2, f = −1, c = −4: r = √(4 + 1 + 4) = 3

The constant is negative here.

Finding the constant

r = 5, g = 3, f = 4: c = 9 + 16 − 25 = 0

The circle passes through the origin.

The centre

the centre is (−g, −f)

For g = −3 and f = 4 it is (3, −4).

Word problems

Write the equation as x² + y² + 2gx + 2fy + c = 0, read g, f and c, and find the radius from r² = g² + f² − c.

Finding the radius

Find the radius of x² + y² − 6x + 8y = 0.

  1. Compare with 2gx and 2fyg = −3 and f = 4
  2. Use the formular² = 9 + 16 − 0 = 25
  3. Rootr = 5
  4. Check: the centre (3, −4) is 5 from the origin ✓The radius is 5.

A negative constant

Find the radius of x² + y² + 4x − 2y − 4 = 0.

  1. g = 2, f = −1, c = −4r² = 4 + 1 + 4 = 9
  2. Rootr = 3
  3. Check: centre (−2, 1) ✓The radius is 3.

Finding c Higher

A circle x² + y² + 6x + 8y + c = 0 has radius 5. Find c.

  1. g = 3, f = 4r² = 9 + 16 − c = 25
  2. Solvec = 0
  3. Check: 9 + 16 − 0 = 25 ✓c = 0.

Is it a circle? Higher

Does x² + y² + 2x + 2y + 5 = 0 describe a circle?

  1. g = 1, f = 1, c = 5r² = 1 + 1 − 5 = −3
  2. A negative r² is impossibleno circle
  3. Check: r² must be positive ✓No, it is not a circle.

Common mistakes

Using the coefficient instead of g

x² + y² − 6x: g = −6 ✗

g = −3 (half the coefficient) ✓

2g is the coefficient.

Using + c

r² = g² + f² + c ✗

r² = g² + f² − c ✓

The sign is minus.

Taking the centre as (g, f)

centre (−3, 4) ✗

centre (3, −4) ✓

The centre is (−g, −f).

Forgetting the root

r = 25 ✗

r = 5 ✓

Take the root.

Accepting a negative r²

r² = −3, r = √−3 ✗

no circle ✓

r² must be positive.

Exam tips

  1. Match 2gx and 2fy.
  2. Use r² = g² + f² − c.
  3. Centre (−g, −f).
  4. Check r² > 0.
  5. Complete the square as a check.

Practice questions

Try each one on paper, then open the answer. Use the solver above to see the full working.

1. Use the formula to find the radius (r) when half the coefficient of x (g) = 1, half the coefficient of y (f) = 2, constant term (c) = 4. Foundation

r = 1

2. Find the constant term (c) when radius (r) = 6, half the coefficient of x (g) = 4, half the coefficient of y (f) = 4. Higher

c = −4

3. Use the formula to find the radius (r) when half the coefficient of x (g) = 2, half the coefficient of y (f) = 4, constant term (c) = 4. Foundation

r = 4

4. Find the constant term (c) when radius (r) = 0, half the coefficient of x (g) = 2, half the coefficient of y (f) = 1. Higher

c = 5

5. Use the formula to find the radius (r) when half the coefficient of x (g) = 1, half the coefficient of y (f) = 1, constant term (c) = −2. Foundation

r = 2

6. Find the constant term (c) when radius (r) = 11, half the coefficient of x (g) = 6, half the coefficient of y (f) = 9. Higher

c = −4

Practice generator

Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.

Solve: …

Key terms

General form
x² + y² + 2gx + 2fy + c = 0.
Radius
r = √(g² + f² − c).
Centre
(−g, −f).
Completing the square
Rewriting in centre-radius form.
Constant term
c.
Coefficient
The number in front of x or y.

Frequently asked questions

What is the general form of a circle?

x² + y² + 2gx + 2fy + c = 0.

How do I find the radius?

r = √(g² + f² − c).

What is the centre?

(−g, −f).

When is it not a circle?

When g² + f² − c ≤ 0.

How do I convert to centre-radius form?

See equation of a circle.

How do I find c?

Rearrange r² = g² + f² − c.

More in Geometry and measures and the formula sheets.