Newton's Second Law Formula Solver with Worked Examples

Newton’s second law says that the resultant force on an object equals its mass times its acceleration: . The calculator finds the force, the mass or the acceleration.

Write 2x or 2*x to multiply, ^ for powers, and ; between simultaneous equations. You can also type factor, expand, derivative of, integrate … from a to b, limit … as x->0 or 15% of 80.

Try an example

Give every value except the one you want, or write the letter with a question mark, for example m=1200, a=1.5 or F=60, m=15. Every answer is checked by putting it back into the formula.

  • : resultant force ()
  • : mass ()
  • : acceleration ()

Before you start

This page is easier if you are comfortable with:

  • weight and mass: the difference between kilograms and newtons
  • adding forces in a straight line, with a sign for the direction
  • the units kg, m s⁻² and N

What Newton's second law means

The resultant force is the total force when all the forces on the object are added, taking directions into account. If the resultant is zero the acceleration is zero.

The law connects forces with motion. A bigger force gives a bigger acceleration, and a bigger mass gives a smaller acceleration for the same force.

Always use mass in kilograms, acceleration in m s⁻² and force in newtons. For a falling object the only force is its weight , so . The forces include weight and friction, they are combined by resolving a force, and in terms of momentum the law reads force = rate of change of momentum.

This page is part of Forces, friction and equilibrium in Mechanics. Topics that work alongside it: Weight, Friction, Momentum, Resultant of perpendicular forces, Equilibrium and Limiting equilibrium on a rough slope.

What is it used for?

Newton’s second law, F = ma, connects the resultant force on an object with its mass and acceleration. It is the main law of motion at A-level.

How to use the newton's second law formula

  1. Draw a force diagram and decide the positive direction.
  2. Find the resultant force in that direction.
  3. Write with the values you know.
  4. Rearrange for the unknown and state its unit.

Diagram

mmgRPF

The resultant force is P − F (driving force minus friction). Newton’s second law gives P − F = ma.

Worked examples

Each example below was worked out by the solver on this page and checked by substituting the answer back into the formula.

Example 1: find the force

A car of mass 1200 kg accelerates at 1.5 m s⁻². Find the resultant force.

Newton's second law Answer checked
Answer
F=1800 NF=1800\ \text{N}
  1. The formula
    Newton's second law. In this formula is the resultant force, is the mass, is the acceleration.
  2. What we know and what we want
    We know and we want to find , the resultant force.
  3. Substitute the numbers
  4. Calculate
  5. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 2: find the acceleration

A resultant force of 60 N acts on a 15 kg trolley. Find its acceleration.

Newton's second law Answer checked
Answer
a=4 m s⁻2a=4\ \text{m s⁻}^{2}
  1. The formula
    Newton's second law. In this formula is the resultant force, is the mass, is the acceleration.
  2. What we know and what we want
    We know and we want to find , the acceleration.
  3. Rearrange for
    Divide both sides by m.
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Example 3: find the mass

A resultant force of 250 N gives an acceleration of 0.5 m s⁻². Find the mass.

Newton's second law Answer checked
Answer
m=500 kgm=500\ \text{kg}
  1. The formula
    Newton's second law. In this formula is the resultant force, is the mass, is the acceleration.
  2. What we know and what we want
    We know and we want to find , the mass.
  3. Rearrange for
    Divide both sides by a.
  4. Substitute the numbers
  5. Calculate
  6. Check by substituting back
    Put all the values back into the original formula: both sides should match.

Special cases

A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.

A resultant of zero

driving 50 N, resistance 50 N: R = 50 − 50 = 0, so a = 0

Balanced forces mean no acceleration: constant velocity or at rest.

Find the resultant first

driving 800 N, resistance 300 N, m = 500 kg: a = (800 − 300) ÷ 500 = 1

Newton’s second law uses the resultant force, not one of the forces.

Free fall

only weight acts: mg = ma, so a = g = 9.8 for any mass

A 2 kg object has weight 19.6 N and acceleration 9.8 m s⁻².

Tonnes to kilograms

1.2 tonnes = 1200 kg: F = 1200 × 1.5 = 1800 N

Always convert to kilograms before you use F = ma.

Rearranging F = ma
To findFormulaExample
FF = ma1200 × 1.5 = 1800 N
mm = F ÷ a250 ÷ 0.5 = 500 kg
aa = F ÷ m60 ÷ 15 = 4 m s⁻²

Word problems

Draw a force diagram, find the resultant force in the direction of motion, then use F = ma. Give the answer with units.

A car

A car of mass 1200 kg accelerates at 1.5 m s⁻². Find the resultant force on it.

  1. Write the lawF = ma
  2. SubstituteF = 1200 × 1.5
  3. CalculateF = 1800 N
  4. Check: a = 1800 ÷ 1200 = 1.5 ✓The resultant force is 1800 N.

A pushed crate

A resultant force of 60 N acts on a crate of mass 15 kg. Find its acceleration.

  1. Rearrangea = F ÷ m
  2. Substitutea = 60 ÷ 15
  3. Calculatea = 4 m s⁻²
  4. Check: 15 × 4 = 60 ✓The acceleration is 4 m s⁻².

With resistance Higher

An 800 kg car has an engine force of 2000 N and a resistance of 600 N. Find its acceleration.

  1. Resultant forceF = 2000 − 600 = 1400 N
  2. Use F = ma1400 = 800a
  3. Dividea = 1.75 m s⁻²
  4. Check: 800 × 1.75 = 1400 ✓The acceleration is 1.75 m s⁻².

A lift Higher

A 60 kg person stands in a lift that accelerates upwards at 0.5 m s⁻². Find the reaction force R from the floor.

  1. The resultant upward force is R minus the weightR − 60 × 9.8 = 60 × 0.5
  2. SubstituteR − 588 = 30
  3. SolveR = 618 N
  4. Check: R is bigger than the weight 588 N, as the lift accelerates upwards ✓The reaction is 618 N.

Common mistakes

Using one force instead of the resultant

engine 800 N, resistance 300 N, m = 500 kg: a = 800 ÷ 500 = 1.6 ✗

resultant = 500 N, a = 500 ÷ 500 = 1 ✓

F in F = ma is the resultant of all the forces.

Forgetting a force

lift: R = ma = 60 × 0.5 = 30 N ✗

R − 588 = 30, so R = 618 N ✓

Include the weight in the force diagram.

Using tonnes without converting

m = 1.2 t, a = 1.5: F = 1.2 × 1.5 = 1.8 N ✗

m = 1200 kg: F = 1800 N ✓

Convert to kilograms.

Adding forces that oppose each other

driving 800 N, resistance 300 N: resultant = 1100 N, so a = 2.2 ✗

resultant = 800 − 300 = 500 N, so a = 1 ✓

Forces in opposite directions subtract.

Rearranging the wrong way up

a = m ÷ F = 15 ÷ 60 = 0.25 ✗

a = F ÷ m = 60 ÷ 15 = 4 ✓

More mass means less acceleration, so mass goes on the bottom.

Leaving out g in a weight

the weight of 2 kg is 2 N ✗

the weight is 2 × 9.8 = 19.6 N ✓

Weight is mg.

Exam tips

  1. Draw a force diagram with every force, including weight and resistance.
  2. Choose a positive direction and add forces with signs.
  3. Write F = ma for the direction of motion before you substitute.
  4. Convert units to kg and m s⁻².
  5. Give the unit: N for force, m s⁻² for acceleration, kg for mass.
  6. Check with the motion: a positive resultant means speeding up in the positive direction. See friction for resistance forces.

Practice questions

Try each one on paper, then open the answer. Use the solver above to see the full working.

1. Use the formula to find the resultant force (F) when mass (m) = 8 kg, acceleration (a) = 8 m s⁻². Foundation

F = 64 N

2. Find the mass (m) when resultant force (F) = 28 N, acceleration (a) = 7 m s⁻². Higher

m = 4 kg

3. Find the acceleration (a) when resultant force (F) = 54 N, mass (m) = 6 kg. Higher

a = 9 m s⁻²

4. Use the formula to find the resultant force (F) when mass (m) = 9 kg, acceleration (a) = 7 m s⁻². Foundation

F = 63 N

5. Find the mass (m) when resultant force (F) = 48 N, acceleration (a) = 8 m s⁻². Higher

m = 6 kg

6. Find the acceleration (a) when resultant force (F) = 25 N, mass (m) = 5 kg. Higher

a = 5 m s⁻²

Practice generator

Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.

Solve: …

Key terms

Resultant force
The single force that has the same effect as all the forces added together.
Mass
The amount of matter in an object, in kilograms.
Acceleration
The rate of change of velocity, in m s⁻².
Newton (N)
The unit of force: 1 N makes 1 kg accelerate at 1 m s⁻².
Equilibrium
A state in which the resultant force is zero.
Resistance
A force that opposes motion, such as friction or air resistance.
Weight
The force of gravity, mg. See weight.
Reaction force
The force from a surface that pushes back on an object.

Frequently asked questions

What is Newton’s second law?

The resultant force on an object equals its mass times its acceleration: F = ma.

What is a resultant force?

The total force found by adding all the forces on the object, taking their directions into account.

What happens if the resultant force is zero?

The acceleration is zero, so the object stays at rest or moves at constant velocity.

What is the unit of force?

The newton (N). One newton is 1 kg m s⁻².

How do you find acceleration from force and mass?

a = F ÷ m. A resultant force of 60 N on a 15 kg object gives a = 4 m s⁻².

How is F = ma related to weight?

The weight of an object is the force mg on it, so a freely falling object has acceleration g. See weight and momentum.

More in Mechanics and the formula sheets.