Dimensional Analysis Explained with Worked Examples

Dimensions describe a quantity in terms of mass (M), length (L) and time (T): , , , . Both sides of an equation must have the same dimensions.

Write 2x or 2*x to multiply, ^ for powers, and ; between simultaneous equations. You can also type factor, expand, derivative of, integrate … from a to b, limit … as x->0 or 15% of 80.

Try an example

Before you start

This page is easier if you are comfortable with:

What Dimensional analysis means

A formula can only be correct if every term has the same dimensions. Dimensional analysis checks a formula quickly, or helps you find how one quantity depends on others.

To find the dimensions of a quantity, replace it by its base dimensions. For example, force is mass times acceleration: .

Pure numbers such as , and angles, have no dimensions. Dimensional analysis cannot find numerical factors; it only shows how quantities combine. The base units are listed in derived SI units, a check can be made on Newton second law and on the period in the simple pendulum and spring-mass period, and momentum has the dimensions of mass times velocity.

This page is part of Momentum, energy and power in Mechanics. Topics that work alongside it: Derived SI units, Newton's second law, Simple pendulum and spring-mass period, Impulse of a variable force, Motion with resistance proportional to speed and Elastic potential energy.

What is it used for?

Dimensional analysis checks that an equation makes sense and helps find how one quantity depends on others.

How to use dimensional analysis

  1. Write the dimensions of each quantity.
  2. Combine them for each side of the equation.
  3. Compare both sides.
  4. To find an unknown power, equate the powers of M, L and T.

Graph

Pendulum period T = 2π√(L/g): T depends on the square root of LL = 1 m: 2.006 s00.511.522.533.544.55012345Pendulum period T = 2π√(L/g): T depends on the square root of Llength L (m)period T (s)T = 2π√(L/9.81)Graph with x from 0 to 5 and y from 0 to 5. Shows the curve T = 2π√(L/9.81); point L = 1 m: 2.006 s at (1, 2.006).

Dimensional analysis shows T must be proportional to √(L/g).

Worked examples

These examples are worked by hand, step by step, so you can compare your own working.

Example 1: check F = ma

Show that is dimensionally consistent.

Worked example
Answer
consistent\text{consistent}
  1. Dimensions of ma
  2. Dimensions of F
  3. Compare

Example 2: check the period of a pendulum

Show that has the dimensions of time.

Worked example
Answer
[T]=T[T]=T
  1. Dimensions of l/g
  2. Square root

Example 3: find a missing power

The speed of a wave depends on a force and a mass per length so that . Find and .

Worked example
Answer
v=kF/μv=k\sqrt{F/\mu}
  1. Dimensions
  2. Equate powers of M, L, T
  3. Solve

Special cases

A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.

[F]

MLT⁻²

Force.

[E]

ML²T⁻²

Energy.

v = at

LT⁻¹ = LT⁻²·T

Consistent.

Power of T in [E]

ML²T⁻²

−2.

Word problems

Dimensions use M, L and T. Both sides of an equation must have the same dimensions; this also helps find the form of a formula.

Force

[F] = [m][a].

  1. M × LT⁻²
  2. Check: ✓1

Energy

[E] = [F][L].

  1. MLT⁻² × L
  2. Check: power of L = 2 ✓2

Check Higher

v = at.

  1. LT⁻² × T
  2. Check: ✓1

T-power Higher

In [E].

  1. −2
  2. Check: ✓-2

Common mistakes

Adding unlike dimensions

m + s ✗

must match ✓

Homogeneity.

Dimensions prove a formula

proves ✗

only checks ✓

Constants unknown.

Numbers have dimensions

M ✗

dimensionless ✓

Pure numbers.

Forgetting powers

L ✗

L² ✓

Exponents.

Exam tips

  1. M, L, T.
  2. Both sides equal.
  3. Constants are dimensionless.
  4. Check formulas.
  5. Find unknown powers.

Practice questions

Try each one on paper, then open the answer. Use the solver above to see the full working.

1. Power of L in [velocity] Foundation

1

2. Power of T in [acceleration] Foundation

-2

3. Power of M in [momentum] Foundation

1

4. Power of L in [pressure] Higher

-1

5. Power of T in [power] Higher

-3

6. Power of L in [energy] Higher

2

Practice generator

Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.

Solve: …

Key terms

Dimension
M, L or T.
Homogeneous
Same dimensions both sides.
Dimensionless
No units.
[F]
MLT⁻².
Derived quantity
Combination.
Exponent
Power.

Frequently asked questions

What are dimensions?

Mass, length and time exponents.

What are the dimensions of force?

MLT⁻².

What are the dimensions of energy?

ML²T⁻².

Does dimensional analysis prove a formula?

No, it checks consistency.

Do constants have dimensions?

Pure numbers do not.

Which page covers derived units?

derived SI units.

More in Mechanics and the formula sheets.