The impulse of a constant force is the force times the time it acts: I=Ft, and it equals the change in momentum, mv−mu. The calculator finds I, F or t.
Give every value except the one you want, or write the letter with a question mark, for example F=40, t=0.5 or I=60, t=0.2. Every answer is checked by putting it back into the formula.
An impulse changes the momentum of an object. A large force acting for a short time, like a bat hitting a ball, can give the same impulse as a small force acting for a long time.
The impulse–momentum principle says Ft=mv−mu. It comes straight from F=ma and a=(v−u)/t.
The unit is the newton second (N s), which is the same as kg m s⁻¹. Impulse is the change in momentum, with Newton second law as its source; for a force that varies see impulse of a variable force, and conservation of linear momentum covers collisions.
Impulse is the change in momentum caused by a force acting for a time. For a constant force it is the force times the time.
Finding the average force in a collision, such as a ball hitting a wall.
Explaining why crumple zones and airbags reduce the force in a crash.
Finding the velocity after a force acts for a given time.
How to use the impulse formula
Decide the positive direction.
Use I=Ft if you know the force and the time.
Or use I=mv−mu if you know the velocities.
Rearrange for the unknown and give the unit N s.
Graph
The shaded rectangle is the impulse: 40 N × 0.5 s = 20 N s.
Worked examples
Each example below was worked out by the solver on this page and checked by substituting the answer back into the formula.
Example 1: find the impulse
A constant force of 40 N acts on a ball for 0.5 s. Find the impulse.
ImpulseAnswer checked
Answer
I=20N s
The formula
Impulse. In this formula I is the impulse, F is the constant force, t is the time the force acts.
I=F×t
What we know and what we want
We know F=40,t=0.5 and we want to find I, the impulse.
Substitute the numbers
I=40×0.5
Calculate
I=20N s
Check by substituting back
Put all the values back into the original formula: both sides should match.
20=40×0.5✓
Example 2: find the force
A kick gives a ball an impulse of 60 N s in 0.2 s. Find the average force.
ImpulseAnswer checked
Answer
F=300N
The formula
Impulse. In this formula I is the impulse, F is the constant force, t is the time the force acts.
I=F×t
What we know and what we want
We know I=60,t=0.2 and we want to find F, the constant force.
Rearrange for F
Divide both sides by t.
F=tI
Substitute the numbers
F=0.260
Calculate
F=300N
Check by substituting back
Put all the values back into the original formula: both sides should match.
60=300×0.2✓
Example 3: find the time
An impulse of 24 N s is given by a force of 8 N. For how long does the force act?
ImpulseAnswer checked
Answer
t=3s
The formula
Impulse. In this formula I is the impulse, F is the constant force, t is the time the force acts.
I=F×t
What we know and what we want
We know I=24,F=8 and we want to find t, the time the force acts.
Rearrange for t
Divide both sides by F.
t=FI
Substitute the numbers
t=824
Calculate
t=3s
Check by substituting back
Put all the values back into the original formula: both sides should match.
24=8×3✓
Special cases
A few situations come up again and again. Knowing them saves time and helps you spot answers that cannot be right.
A ball bouncing
m = 0.2, u = 10, v = −8: I = 0.2 × (−8 − 10) = −3.6 N s
The velocity reverses, so the change is the sum of the sizes: 18 × 0.2.
Airbags
I = 60 N s: over 0.2 s F = 300 N, over 0.6 s F = 100 N
A longer stopping time gives a smaller force for the same impulse.
From rest
m = 0.5, v = 12: I = 0.5 × 12 = 6 N s
With u = 0 the impulse is the final momentum.
The units
1 N s = 1 kg m s⁻¹
Impulse and momentum have the same unit.
Examples of I = Ft
Force
Time
Impulse
40 N
0.5 s
20 N s
300 N
0.2 s
60 N s
8 N
3 s
24 N s
150 N
0.04 s
6 N s
Word problems
Use I = Ft for a constant force, and I = mv − mu for the change in momentum. Choose a positive direction and keep the signs.
A kick
A constant force of 40 N acts on a ball for 0.5 s. Find the impulse.
Write the formulaI = Ft
SubstituteI = 40 × 0.5
CalculateI = 20 N s
Check: the units are N × s = N s ✓The impulse is 20 N s.
Finding the force
An impulse of 60 N s is given over 0.2 s. Find the force.
RearrangeF = I ÷ t
SubstituteF = 60 ÷ 0.2
CalculateF = 300 N
Check: 300 × 0.2 = 60 ✓The force is 300 N.
A ball rebounding Higher
A 0.2 kg ball hits a wall at 10 m s⁻¹ and rebounds at 8 m s⁻¹. The contact lasts 0.02 s. Find the impulse and the average force, taking the initial direction as positive.
The final velocity is −8I = m(v − u) = 0.2 × (−8 − 10)
Calculate the impulseI = −3.6 N s
Average force = impulse ÷ timeF = −3.6 ÷ 0.02 = −180 N
Check: the negative sign shows the force on the ball is away from the wall ✓The impulse is −3.6 N s and the average force is 180 N away from the wall.
Finding the time Higher
A force of 8 N gives an impulse of 24 N s. How long does it act?
Rearranget = I ÷ F
Substitutet = 24 ÷ 8
Calculatet = 3 s
Check: 8 × 3 = 24 ✓The force acts for 3 s.
Common mistakes
Forgetting the sign when the velocity reverses
ball: I = 0.2 × (8 − 10) = −0.4 ✗
I = 0.2 × (−8 − 10) = −3.6 ✓
A rebound has the opposite sign for the final velocity.
Using the impulse as a force
the impulse of 60 N s is a force of 60 N ✗
F = I ÷ t = 60 ÷ 0.2 = 300 N ✓
An impulse is a force multiplied by a time.
Mixing N s with N
I = 20 N ✗
I = 20 N s ✓
The unit of impulse is N s.
Using the final momentum instead of the change
I = mv = 0.2 × (−8) = −1.6 ✗
I = mv − mu = −3.6 ✓
Impulse is the change in momentum.
Dividing instead of multiplying
I = F ÷ t = 40 ÷ 0.5 = 80 ✗
I = Ft = 20 N s ✓
Impulse is force times time.
Forgetting to convert the time
F = 4 N for 200 ms: I = 4 × 200 = 800 ✗
0.2 s: I = 4 × 0.2 = 0.8 N s ✓
Convert milliseconds to seconds.
Exam tips
Choose a positive direction and write each velocity with its sign.
Use I = mv − mu when you know the velocities, and I = Ft when you know the force and time.
Convert units: kg, m s⁻¹ and s.
State the unit N s.
For a rebound the final velocity has the opposite sign.
Link to impulse of a variable force when the force changes.
Practice questions
Try each one on paper, then open the answer. Use the solver above to see the full working.
1. Use the formula to find the impulse (I) when constant force (F) = 2 N, time the force acts (t) = 9 s. Foundation
I = 18 N s
2. Find the constant force (F) when impulse (I) = 27 N s, time the force acts (t) = 3 s. Higher
F = 9 N
3. Find the time the force acts (t) when impulse (I) = 54 N s, constant force (F) = 9 N. Higher
t = 6 s
4. Use the formula to find the impulse (I) when constant force (F) = 3 N, time the force acts (t) = 9 s. Foundation
I = 27 N s
5. Find the constant force (F) when impulse (I) = 12 N s, time the force acts (t) = 4 s. Higher
F = 3 N
6. Find the time the force acts (t) when impulse (I) = 16 N s, constant force (F) = 2 N. Higher
t = 8 s
Practice generator
Unlimited fresh questions with instant marking. Choose a level, work it out on paper, then type your answer.
Solve: …
Key terms
Impulse (I)
The change in momentum, equal to force times time, in N s.
Momentum
Mass times velocity. See momentum.
Constant force
A force that does not change in size or direction.
Rebound
A bounce in which the velocity changes direction.
Contact time
How long the force acts.
Newton second (N s)
The unit of impulse.
Average force
The impulse divided by the time of contact.
Impulse–momentum principle
Ft = mv − mu.
Frequently asked questions
What is impulse?
Impulse is the change in momentum of an object. For a constant force it is I = Ft.
What is the formula for impulse?
I = Ft = mv − mu.
What is the unit of impulse?
The newton second (N s), which equals kg m s⁻¹.
How is impulse related to momentum?
The impulse on an object equals its change in momentum. See momentum.
Why do airbags help in a crash?
They lengthen the time over which the momentum changes, so the same impulse needs a smaller force.
What if the force is not constant?
Use the area under a force–time graph, or an integral. See impulse of a variable force.